Ecofoam SPF Installation
Where to apply
- We can apply our Ecofoam Polyurethane Insulation on existing built-up roof, all loose gravel and debris is removed.If necessary blistered and saturated areas are removed. Pressure washing is done on metal roofs to remove all dirt and debris. A rust inhibitor is used on roofs when dust is present.
- The Ecofoam Polyurethane Insulation is applied as a liquid and rises in seconds. The roof can be walked on in a matter of minutes. Areas where the roof sags can be built up for proper drainage by applying more foam in the problem areas.
- The Ecofoam Polyurethane Insulation roof is now ready for coating. An elastomeric, weather resistant coating is applied to seal the foam. The normal coverage is two coats with the final coat being white. Other colors may be used but the white coating further reduces heat. The foam must be recoated every 8-10 years.
- We can apply our Ecofoam Polyurethane Insulation in various sites such as; Residential, Commercial and Industrial
Areas and Types
Roofing application (roof top)
Dry wall application (ceiling)
Dry wall application (concrete)
Dry wall application (steel/ plywood)
Theater and Movie Set Design
How to apply Ecofoam SPF
We can apply the Ecofoam Polyurethane Insulation if the substrate to be applied for is clean and dry. If the substrate is neither wet nor dirty, the Ecofoam Polyurethane Insulation might not bond with the substrate causing it to pill off. The equipments that we are using are the proportioning machines, air compressors, hoses and spray air guns. Our insulation terms are experts in terms of applying the Ecofoam Polyurethane Insulation in any substrates and they usually apply it with a 90° angle to be much more proportions. We are using 40% Freon or blowing agent in order for our Ecofoam Polyurethane Insulation to be a good insulation material. Ecofoam Polyurethane Insulation should be sprayed if the weather is not humid, or we can apply it if the sun is high in order for it to cure effectively and efficiently.