Ecofoam Fill ‘Em Up

Ecofoam Fill’ em Up

Ecofoam Fill’ em Up is a multipurpose polyurethane foam which is a one component type of polyurethane which is hardened by the vapor in the air when sprayed. It will fill holes, vacant spaces, cracks or in between electrical wiring.

Best For

Filling Gaps

Filling Cracks

Filling Holes

Components

Polymeric MDI

Polyether Polyol

Propane/Butane (Propellant)

Ecofoam Fill ‘Em Up Characteristics

PROPERTY VALUE
Type Polyurethane Pre-polymer
Curing system Moisture curing
Characteristic Flexible
Yield (freely foamed) Maximum of 40 Liters
Combustibility fire class B3 (DIN 4102)
Tack-free time 10-15 mins. (20oC, 60% RH)
Cutting time 40-60 mins. (20oC, 60% RH)
Full cure time 24 hours (20oC, 60% RH)
Thermal conductivity 0.02-0.04 W/m-K
Water absorption 1.0-2.0 g/100 cm2

Ecofoam Fill ‘Em Up Dual Type
2-in-1 Canister


Gun Type

For heavy duty and regular construction application.


Adapter Type

For small and non-regular construction projects.

Sample Applications

Fills the gaps between the corrugated roofs and walls

Filling of the openings in walls and partitions

Installs and seals air-conditioning units

Installation of the electrical wiring

Filling of the cavities

Thermal insulation of the panels

Adaptor Type Application

Remove the cab

Shake it, wait for 2 minutes

Load the adaptor on the foam can

Turn the can upside down when in use

Gun Type Application

Remove the cab

Shake it, wait for 2 minutes

Load the gun on the foam can

Turn the gun upside down when in use

How To Use

  • Avoid direct sunlight. Do not store the product in places with temperature of 40°C or higher.
  • Do not store the product lying on its side. Place it upright.
  • Do not throw in the fire after use.
  • When empty, spray out the remaining gas left inside the can.
  • Separate from other general waste during waste disposal.

Take Note

  • Spray surface with water prior to application of Ecofoam. Moisten every layer in case of multi-layer application.
  • Removal of spoiled foam: Use Ecofoam cleaner or acetone for fresh foam. Use knife or cured foam (do not burn).

Storage Direction

Avoid direct sunlight. Do not store the product in places with temperature of 40°C or higher.

Do not store the product in an enclosed area.

Do not store the product lying on its side. Place it upright.

Do not throw in the fire after use.

When empty, spray out the remaining gas left inside the can.

Separate from other general waste during waste disposal.